From: jfaure@sztele.com
Date: Sat Jan 17 2004 - 14:44:45 GMT-3
Hi Folks.
Imagine you have a router in a site that normally goes to backbone through
Frame Relay, but you also have a DDR isdn link to access if the frame
service is out of service. Your local router is doing dlsw tcp based with a
remote router too.
If they ask to configure the dial backup solution to avoid that DLSW
traffic "goes up" the isdn link, what do you think is the best solution,
and why:
1-A dialer-group list denying dlsw as interesting traffic
2- To use the option KEEPALIVE 0 in "dlsw remote-peer" command
Thank you very much for your help.
Regards
Juan Faure Ferrer
email: jfaure@sztele.com
Lmnea de Negocio de Telematica y CC
Ingeniero de Integracisn de Redes y Sistemas
----------------------------------------------------------------------------
SOLUZIONA TELECOMUNICACIONES
Servicios Profesionales de UNION FENOSA
Jerez, 3
28016 MADRID
tel 91 579 30 00 fax 91 350 72 83
---------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:47 GMT-3