From: Ludwig Morales (morales_l@hotmail.com)
Date: Tue Jan 13 2004 - 11:05:34 GMT-3
The only idea that comes to my mind righ now is that you do PAT on the dsl
router and map for example port 2301 to port 23 ont term ser1 2302 to port
23 on term serv2 and so on, regarding access policies you do that by using
radius on the access server and autenticating on the ACS, once you set this
up, this part of the ACS is not that complicated to configure.
Regards,
----- Original Message -----
From: "Matheen Farook" <matheen_fa@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Tuesday, January 13, 2004 8:14 AM
Subject: Reg 2511 setup
> Hai All,
> I have one public ip, and I wanted to access multiple Terminal
server which is inside my Network. say user1 may access term ser1 on one
day, the same user may access the term ser 2 on some other day. I am using
Cisco ACS. how can be this done.
>
>
> Term ser 1 ----------
> |
> Term Ser 2 -------------------------- ADSL Router ---------------------
Internet
> |
> Term ser 3 ----------
>
> Thanks in advance
> WIth Kind Regards
> Matheen
>
>
> ---------------------------------
> Do you Yahoo!?
> Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:43 GMT-3