From: kasturi cisco (kasturi_cisco@hotmail.com)
Date: Mon Jan 12 2004 - 14:14:29 GMT-3
Kennth,
Thanks for the reply ! but if you see my mail ..its not for admin work.i
have 443 and 80 open and can manage it..but i want my routers and
switches to communicate with Cworks..send their SNMP traps,reporting and
syslog messages to Cworks.also i want Admin to be able to load IOS
configs onto the routers and switches in the enterprise (and in the IP
address list manages by cworks) from Cworks.
So i need to open ports on PIX firewall and also also modify the existing
ACLS right on routers such that they can send their traps and allow the
Cworks box to communicate with them.
the setup is like this
--------- Cworks -----Switch-----------PIX firewall----------DMZ
-------| routers/switches
|
|---------- outside
world or DMZ 2 |----routers/switches
Luck,
Kasturi.
------------------------------------------------------------------------
Marriage? Join BharatMatrimony.com and get married.
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:43 GMT-3