From: Kenneth Wygand (KWygand@customonline.com)
Date: Mon Jan 12 2004 - 13:59:11 GMT-3
Also TCP/80 &/or TCP/443 if you want to enable web-based configuration
functionality.
Kenneth E. Wygand
Systems Engineer, Project Services
CISSP #37102, CCNP, CCDP, ACSP, Cisco IPT Design Specialist, MCP, CNA,
Network+, A+
Custom Computer Specialists, Inc.
"Real Engineers Debug in Binary."
-kw
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
kasturi cisco
Sent: Monday, January 12, 2004 11:38 AM
To: ccielab@groupstudy.com
Subject: OT:Ciscoworks Port # for PIX/Acls
Group,
Does anyone have a document or list handy which lists all the ports #
that need to be opened on a PIX (incoming and outgoing) for Cisco works
to communicate with routers and switches.
Also what ports needed to be opened on a router/switch ACL if we are
going to use the Cisco works box pretty much to its full
capability..like
dump router configs onto Cworks, IOS upgrades etc..wanted to confirm
with
what I have.
I think the following should do it -
161/udp (Standard port for SNMP Polling)
162/udp (Standard port for SNMP Traps)
23/tcp (Standard port for Telnet)
22/tcp (Standard port for SSH)
69/udp (Standard port for TFTP)
514/tcp (RCP port)
Thanks.
Kasturi.
------------------------------------------------------------------------
Meet a mate. Find a soulmate. Or just chat a while.
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:43 GMT-3