From: istong@stong.org
Date: Thu Jan 08 2004 - 09:33:45 GMT-3
Hi,
The command reference doesn't mention a default value. I
would recommend you just specify with the options exacly
what you want to do using the switches - i.e. outbound,
inbound or either).
dialer load-threshold
To configure bandwidth on demand by setting the maximum load
before the dialer places another call to a destination, use
the dialer load-threshold command in interface configuration
mode. To disable the setting, use the no form of this
command.
dialer load-threshold load [outbound | inbound | either]no
dialer load-threshold
Syntax Description - load
Interface load used to determine whether to initiate another
call or to drop a link to the destination. This argument
represents a utilization percentage; it is a number between
1 and 255, where 255 is 100 percent.
outbound - (Optional) Calculates the actual load using
outbound data only.
inbound - (Optional) Calculates the actual load using
inbound data only.
either - (Optional) Sets the maximum calculated load as the
larger of the outbound and inbound loads.
Defaults - No maximum load is predefined.
Thanks,
Ian
http://www.ccie4u.com
CCIE Rack Rentals and Lab Scenarios
> If I just input dialer load-threshold 100, does it apply
> to inbound, outbound or either ?
>
> thanks
> alec
>
> __________________________________________________________
> _____________ Please help support GroupStudy by purchasing
> your study materials from: http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
______________________________________________
Check Your Email From Any Where in the World!
Tell Your Friends about MyEmail.com!
______________________________________________
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:38 GMT-3