From: David Deng (glend_99@yahoo.com)
Date: Fri Jan 02 2004 - 00:22:11 GMT-3
Hi Group,
Happy new year.
I run into a question to make the ISIS external route
and Inter area routes to have the same metric value 30
on r3.
I have attemptted to tweak the value of r4 s0/0.24
interface, however if I change the value of ISIS
metric it affect the metric value of all the routes
from r2, please help.
Also what does the external or internal routes means
in ISIS ?
I have also try to affect the connect int of 4 by
"redistributing connect metric 30", it does not
have any effect on r3.
Here is the topology of the int and ISIS level.
f0/0
|
| s0/0.24 s0/0.24 e0/1 e0/0
R2 ------------------r4 ----------------r3
| L2 L2 | L1 L1
| |
lo0 lo0
r2: lo0 136.10.2.2/24
f0/0 136.10.12.2/24
s0/0.24 136.10.24.2/29
r4: lo0 136.10.4.4/24
s0/0.24 136.10.24.4/29
e0/1 40.40.40.4/24
r3: lo 136.10.3.3/24
e0/0 40.40.40.3/24
r3-36-is#sh ip ro
Gateway of last resort is 40.40.40.4 to network
0.0.0.0
136.10.0.0/16 is variably subnetted, 5 subnets, 2
masks
i ia 136.10.2.0/24 [115/30] via 40.40.40.4,
ethernet0/0
C 136.10.3.0/24 is directly connected, Loopback0
i ia 136.10.4.0/24 [115/30] via 40.40.40.4,
Ethernet0/0
i ia 136.10.12.0/24 [115/30] via 40.40.40.4,
Ethernet0/0
i ia 136.10.24.0/29 [115/20] via 40.40.40.4,
Ethernet0/0
40.0.0.0/24 is subnetted, 1 subnets
C 40.40.40.0 is directly connected, Ethernet0/0
i*L1 0.0.0.0/0 [115/10] via 40.40.40.4, Ethernet0/0
Thanks,
David
__________________________________
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
http://antispam.yahoo.com/whatsnewfree
This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 09:07:35 GMT-3