From: Scott Morris (swm@emanon.com)
Date: Sun Dec 28 2003 - 22:48:50 GMT-3
If you specify "switchport mode trunk" then your access-vlan command
becomes pointless.
I would drop that command.
Scott
-----Original Message-----
From: Kaiser Anwar [mailto:kaiseranwar@sbcglobal.net]
Sent: Sunday, December 28, 2003 8:44 PM
To: swm@emanon.com
Cc: ccielab@groupstudy.com
Subject: Re: Dot1q encapsulation on Voice vlan
Hi Scott,
Would this config be correct assuming two separate vlans one
for data and one for voice. mls qos
> !
> interface FastEthernet0/2
> switchport access vlan 500
> switchport mode trunk
> switchport voice vlan 501
> switchport qos trust cos
> no ip address
> spanning-tree portfast
Thanks
----- Original Message -----
From: "Scott Morris" <swm@emanon.com>
To: "'Kaiser Anwar'" <kaiseranwar@sbcglobal.net>
Sent: Sunday, December 28, 2003 7:40 PM
Subject: RE: Dot1q encapsulation on Voice vlan
> It depends what hardware you are using. For the 3550, the answer is
> no.
>
>
> Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> CISSP, JNCIS, et al. IPExpert CCIE Program Manager
> IPExpert Sr. Technical Instructor
> swm@emanon.com/smorris@ipexpert.net
> http://www.ipexpert.net
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of Kaiser Anwar
> Sent: Sunday, December 28, 2003 5:36 PM
> To: ccielab@groupstudy.com
> Subject: Dot1q encapsulation on Voice vlan
>
>
> switchport trunk encapsulation dot1q
>
> is it always mandatory to have this command for voice vlan
> configuration. Thanks
>
>
>
>
>
>
>
>
>
> Sincerely,
> Kaiser Anwar
>
> ______________________________________________________________________
> _
> Please help support GroupStudy by purchasing your study materials
from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:46 GMT-3