From: 1cmpecho (1cmpecho@hotpop.com)
Date: Wed Dec 24 2003 - 16:05:18 GMT-3
thoughts.
-on ccm, in the routegroup/routelist for these outbound trunks - give the
preferred one preference by listing it first in the device list...probable
9.@ - or whatever you use to ship out local and ld - and other services
-you maybe have to speak to your provider to have them direct search order
for your did ranges coming inbound.
more info can be found in the ccm admin manual.
At 10:59 AM 12/24/2003 -0800, John Humphrey wrote:
>I've got a CallManager (v3.1). The PSTN gateway is a 2620 router with a
>VWIC-1MFT-T1 card in it. We've got an ISDN PRI coming in with H.323
>running between the CCM and the gateway. We've recently ordered a second
>PRI (the first is running low on available lines). I've also ordered
>VWIC-2MFT-T1 card to go in the WIC slot. I've used this type card plenty
>of times for data T1 circuits, but I've having a hard time finding some
>good documentation explaining how to add the second PRI to the CCM gateway
>list. I'd like to use the first one for incoming calls and the second for
>outgoing. Any idea where I can find some more info on this?
>
>John Humphrey
>
>
>---------------------------------
>Do you Yahoo!?
>New Yahoo! Photos - easier uploading and sharing
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:44 GMT-3