Bridging 2 serial interface

From: Tomikawa (h-tomikawa@syscomusa.com)
Date: Tue Dec 23 2003 - 18:44:19 GMT-3

• Next message: Brian McGahan: "RE: 2511 setup"
• Previous message: Brian Dennis: "RE: Flapping interface"
• Next in thread: Brian McGahan: "RE: Bridging 2 serial interface"
• Maybe reply: Brian McGahan: "RE: Bridging 2 serial interface"
• Maybe reply: Tomikawa: "Re: Bridging 2 serial interface"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi, Group.

I would like to have a question.
One router is connected to another router via 2 serial interface. (T1)
Somehow, I have to configure bridging between 2 LAN through these routers.
If I simply configure "bridge-group" in all serial interfaces, of course
one interface
will be "blocked" by spanning tree.

What is the best way to bundle these 2 serial interface as one
spanning-tree instance.
Using "bridge-group 1 circuit-group1" or enable PPP and bundling?

Thanks in advance.

Tomi

• Next message: Brian McGahan: "RE: 2511 setup"
• Previous message: Brian Dennis: "RE: Flapping interface"
• Next in thread: Brian McGahan: "RE: Bridging 2 serial interface"
• Maybe reply: Brian McGahan: "RE: Bridging 2 serial interface"
• Maybe reply: Tomikawa: "Re: Bridging 2 serial interface"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:44 GMT-3