From: arvindyadav@comcast.net
Date: Mon Dec 15 2003 - 14:53:56 GMT-3
Yes, you can't change the AD for specific external routes in EIGRP.
----- Original Message -----
From: "Ozgur Guler (Garanti Teknoloji)" <OzgurG@garanti.com.tr>
To: "ward Priestman" <ccie@priestman.org>; <ccielab@groupstudy.com>
Sent: Monday, December 15, 2003 9:02 AM
Subject: RE: Eigrp distance command
> you can not do this with eigrp
> there is sthg else you can do though
> since you can not change ADs of these routes in EIGRP domain,
> set the distance of these routes to 171 in the neighboring igp.
> it will have the same effect,
> it will make these routes to be learnt via eigrp.
>
> Ozgur
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
ward Priestman
> Sent: Monday, December 15, 2003 2:52 PM
> To: ccielab@groupstudy.com
> Subject: Re: Eigrp distance command
>
>
> thats altering the distance for the whole protocol i want to alter for
just
> some particular routes not all
>
>
>
> ----- Original Message -----
> From: "rnasr" <rnasr@s2n.com.au>
> To: "'ward Priestman'" <ccie@priestman.org>; <ccielab@groupstudy.com>
> Sent: Sunday, December 14, 2003 12:50 PM
> Subject: RE: Eigrp distance command
>
>
> > router eigrp 100
> > P4Cat2(config-router)#distance ei
> > P4Cat2(config-router)#distance eigrp ?
> > <1-255> Distance for internal routes
> >
> > P4Cat2(config-router)#distance eigrp 150 ?
> > <1-255> Distance for external routes
> >
> > P4Cat2(config-router)#distance eigrp 150 200 ?
> > <cr>
> >
> > P4Cat2(config-router)#distance eigrp 150 200
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > ward Priestman
> > Sent: Monday, December 15, 2003 9:52 PM
> > To: ccielab@groupstudy.com
> > Subject: Re: Eigrp distance command
> >
> >
> > thaqt command is not allowed
> >
> >
> > G3R5(config-router)#distance 255 ?
> > A.B.C.D IP Source address
> >
> > any other ideas ?
> > ----- Original Message -----
> > From: "rnasr" <rnasr@s2n.com.au>
> > To: "'ward Priestman'" <ccie@priestman.org>
> > Sent: Sunday, December 14, 2003 5:28 AM
> > Subject: RE: Eigrp distance command
> >
> >
> > > try distance 200 255 etc...
> > >
> > >
> > > 200 for internal
> > > 255 for external
> > >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > > ward Priestman
> > > Sent: Monday, December 15, 2003 3:46 AM
> > > To: ccielab@groupstudy.com
> > > Subject: Eigrp distance command
> > >
> > >
> > > Hi all
> > >
> > > I have tried using the distance command under eigrp to influence
> incoming
> > > routes. I have noticed it does not affect external routes
> > >
> > > any ideas why
> > >
> > >
> > > ie
> > >
> > > distance 255 139.3.139.3 0.0.0.0
> > >
> > > thanks
> > >
> > >
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:41 GMT-3