From: Driessens.Hans (hans.driessens@siemens.com)
Date: Mon Dec 15 2003 - 13:42:36 GMT-3
where is your key-chain in global config?
it could look like this
key chain ccie
key 1
key-string ccie
cheers
Hans
(don't use capitals or straenge symbols in the key chain name, it will not
work -> bug)
-----Oorspronkelijk bericht-----
Van: ccie [mailto:ccie@tisolutions.biz]
Verzonden: Monday, December 15, 2003 5:30 PM
Aan: ccielab@groupstudy.com
Onderwerp: EIGRP authentication
Hi All
I having a few problems with eigrp authentication. Routers R7 and R8 are
connected via serial. I have tested layer 1-3 connectivity which is OK.
eigrp is forming neighbors ok when authentication is not configured. OSPF
is also running and is working OK with adj being formed etc. The relevent
portion of the config are below:
The debug from R7 is as follows:
*Mar 1 00:28:21.577: EIGRP: Serial0/1: ignored packet from 150.50.5.69,
opcode
= 5 (missing authentication)
R8
interface Serial0
ip address 150.50.5.69 255.255.255.224
ip authentication mode eigrp 1 md5
ip authentication key-chain eigrp 1 ccie
no fair-queue
router eigrp 1
network 150.50.4.0 0.0.0.255
network 150.50.5.64 0.0.0.31
no auto-summary
no eigrp log-neighbor-changes
R7
interface Serial0/1
ip address 150.50.5.68 255.255.255.224
ip authentication mode eigrp 1 md5
ip authentication key-chain eigrp 1 ccie
ip summary-address eigrp 1 172.16.0.0 255.255.252.0 5
clockrate 64000
router eigrp 1
network 150.50.5.64 0.0.0.31
network 150.50.7.0 0.0.0.127
network 172.16.0.0
no auto-summary
thanks in advance
Mark
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:41 GMT-3