From: Ozgur Guler (Garanti Teknoloji) (OzgurG@garanti.com.tr)
Date: Mon Dec 15 2003 - 11:02:45 GMT-3
you can not do this with eigrp
there is sthg else you can do though
since you can not change ADs of these routes in EIGRP domain,
set the distance of these routes to 171 in the neighboring igp.
it will have the same effect,
it will make these routes to be learnt via eigrp.
Ozgur
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of ward Priestman
Sent: Monday, December 15, 2003 2:52 PM
To: ccielab@groupstudy.com
Subject: Re: Eigrp distance command
thats altering the distance for the whole protocol i want to alter for just
some particular routes not all
----- Original Message -----
From: "rnasr" <rnasr@s2n.com.au>
To: "'ward Priestman'" <ccie@priestman.org>; <ccielab@groupstudy.com>
Sent: Sunday, December 14, 2003 12:50 PM
Subject: RE: Eigrp distance command
> router eigrp 100
> P4Cat2(config-router)#distance ei
> P4Cat2(config-router)#distance eigrp ?
> <1-255> Distance for internal routes
>
> P4Cat2(config-router)#distance eigrp 150 ?
> <1-255> Distance for external routes
>
> P4Cat2(config-router)#distance eigrp 150 200 ?
> <cr>
>
> P4Cat2(config-router)#distance eigrp 150 200
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> ward Priestman
> Sent: Monday, December 15, 2003 9:52 PM
> To: ccielab@groupstudy.com
> Subject: Re: Eigrp distance command
>
>
> thaqt command is not allowed
>
>
> G3R5(config-router)#distance 255 ?
> A.B.C.D IP Source address
>
> any other ideas ?
> ----- Original Message -----
> From: "rnasr" <rnasr@s2n.com.au>
> To: "'ward Priestman'" <ccie@priestman.org>
> Sent: Sunday, December 14, 2003 5:28 AM
> Subject: RE: Eigrp distance command
>
>
> > try distance 200 255 etc...
> >
> >
> > 200 for internal
> > 255 for external
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> > ward Priestman
> > Sent: Monday, December 15, 2003 3:46 AM
> > To: ccielab@groupstudy.com
> > Subject: Eigrp distance command
> >
> >
> > Hi all
> >
> > I have tried using the distance command under eigrp to influence
incoming
> > routes. I have noticed it does not affect external routes
> >
> > any ideas why
> >
> >
> > ie
> >
> > distance 255 139.3.139.3 0.0.0.0
> >
> > thanks
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:41 GMT-3