From: JHays (nomad@gfoyle.org)
Date: Thu Dec 11 2003 - 09:16:10 GMT-3
This subject comes up a lot and there is lots of information in the
Groupstudy archives.
http://www.groupstudy.com/cgi-bin/search and select CCIE R&S
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Firesox
Sent: Wednesday, December 10, 2003 6:31 PM
To: cisco@groupstudy.com
Subject: pim nbma-mode [7:80632]
Can someone tell me when to use pim nbma-mode?
If I understand this correctly, I need this in the hub router in the
NBMA
interface such as frame/atm.
I have looked at some sample configs. In some configs, "ip pim
nbma-mode"
is configured even on the spoke routers.
I would appreciate if somoeone clearify this command.
Thanks
**Please support GroupStudy by purchasing from the GroupStudy Store:
http://shop.groupstudy.com
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:39 GMT-3