From: Marko Berend (marko.berend@storm.hr)
Date: Thu Dec 11 2003 - 08:17:21 GMT-3
Thanks John, but this is not helping
My source address is ok, it is from the VPN range, and the SP is using
it as the source address.
VPN client 4.x creates a virtual interface in win XP so you can see it
with "ipconfig", and the SP is properly configured to use this address.
For example I get 10.11.0.240 (my LAN is 10.11.0.0/24) and this is the
address in SP net configuration.
IP phones are on 10.11.3.0/24, but routing is OK, because I can ping
them and everything. No access-lists in between . I am sure it is not a
routing problem
But anyway, no voice towards me.
This is why I am posting here, it is not trivial.
-----Original Message-----
From: John Messina [mailto:john@area100.com]
Sent: 11. prosinac 2003 11:48
To: Marko Berend; ccielab@groupstudy.com
Subject: RE: SoftPhone - one way voice over VPN (good src addr)
http://www.cisco.com/en/US/products/sw/voicesw/ps1860/products_tech_note
09186a0080094ed1.shtml
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Marko Berend
Sent: Thursday, December 11, 2003 5:18 AM
To: ccielab@groupstudy.com
Subject: SoftPhone - one way voice over VPN (good src addr)
Hi to all,
I am having trouble with Cisco SoftPhone over VPN. The voice is one way
only. I am not getting any traffic from the IP phone on the other end.
The scenario is this:
SPhone-------VPN----------->PIX-------->CM-------->IP Phone 7940
The IP address on the SoftPhone is correct in the SP network settings
(cisco.com says this is the solution but it isn't working still).
Everything works fine on the LAN. From VPN I can ping everything, CM,
VG, even the IP phone I am calling, but I'm not getting voice traffic
from it. When I sniff the traffic I see that nothing is coming. From
CallManager I can verify that the SoftPhone is registered with the
correct IP address. I have also tried modifying the MTU on the VPN
client but to no avail.
CM is 3.1
SF is 1.3(3)
PIX 6.3(3)
VPN client 4.x (I've tried with 3.x also)
I suspect that the PIX is making my life miserable, but it is not
logical. It must be a bug. Any comments or good ways to troubleshoot it?
Thanks
Marko
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:39 GMT-3