From: Oleg (olegoz@comcast.net)
Date: Sun Dec 07 2003 - 17:19:55 GMT-3
You should still see the PVC. You should not see them dynamically mapped
(sho frame-relay map).
O.
----- Original Message -----
From: "Michael Whisenant" <michael@whisenant.net>
To: <ccielab@groupstudy.com>
Sent: Saturday, December 06, 2003 8:59 PM
Subject: Output from "SHOW FRAM PVC"
> Working on some labs and there is a section that states only those defined
> DLCI's should be used, so I think no frame-relay inverse-arp and no arp
> frame-relay. Before I no shut my port I configure this for the physical
and
> logical interfaces, complete addressing, map statements etc. Then when I
no
> shut the interface those DLCI;s that I did not use still report on the
> physical interface as ACTIVE. Since the frame switch is sending the status
> in the ilmi why does the router still place that data in the output of the
> show frame pvc. I have specifically told the router NOT to use them....
>
> [GroupStudy removed an attachment of type application/pgp-signature]
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:37 GMT-3