Re: VMPS file name

From: John Tafasi (johntafasi@yahoo.com)
Date: Thu Dec 04 2003 - 18:29:52 GMT-3

• Next message: Stuart Reabow: "A new command to make things a bit easier"
• Previous message: russ davidson: "RE: CA Server setup"
• Maybe in reply to: John Tafasi: "VMPS file name"
• Next in thread: Vazman@aol.com: "Re: VMPS file name"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

As far as I know you only need to configure the ip address of the TFTP
server. Can you give a sample configuration of the switch to use the VMPS
server.

Thanks

John
----- Original Message -----
From: <Vazman@aol.com>
To: ""John Tafasi"" <johntafasi@yahoo.com>; <ccielab@groupstudy.com>
Sent: Thursday, December 04, 2003 7:55 AM
Subject: Re: VMPS file name

> I dont think it has to be a standard name as long as the name on the
switch and the TFTP server match. We use "vmps-config-database.1" as the
file name. I think that is what they have in the documentation example.
>
> HTH
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

• Next message: Stuart Reabow: "A new command to make things a bit easier"
• Previous message: russ davidson: "RE: CA Server setup"
• Maybe in reply to: John Tafasi: "VMPS file name"
• Next in thread: Vazman@aol.com: "Re: VMPS file name"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jan 03 2004 - 08:25:35 GMT-3