From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Sat Nov 29 2003 - 00:09:39 GMT-3
How would redistributing OSPF into RIP cause a problem? Did you mean
redistributing RIP into OSPF? Also can you explain exactly why the /32s
where causing the ISDN line to bounce?
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
________________________________________
From: Ahmed [mailto:ahmed_mustafa01@excite.com]
Sent: Friday, November 28, 2003 6:44 PM
To: bdennis@internetworkexpert.com; ahmed_mustafa01@excite.com;
ccielab@groupstudy.com
Subject: RE: ospf network point-to-multipoint
If the hub (r1) and spokes (r2,and r3) are on ospf network, and hub is also
connected through ISDN to another router (r4) running rip. Now, let say I
want to redistribute ospf routes to rip domain, making my hub router ASBR.
r4 would obviously receive the ospf (loopback routes) as /32. Because of the
/32 routes the ISDN link would keep coming up.
--- On Fri 11/28, Brian Dennis < bdennis@internetworkexpert.com > wrote:
From: Brian Dennis [mailto: bdennis@internetworkexpert.com]
To: ahmed_mustafa01@excite.com, ccielab@groupstudy.com
Date: Fri, 28 Nov 2003 18:36:09 -0800
Subject: RE: ospf network point-to-multipoint
I'm obviously not familiar with the lab product you are referring to ;-) So
what is the exact problem that was created with the /32s?
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
________________________________________
From: Ahmed [mailto:ahmed_mustafa01@excite.com]
Sent: Friday, November 28, 2003 6:25 PM
To: bdennis@internetworkexpert.com; Paul.Casey@o2.com;
ccielab@groupstudy.com
Subject: RE: ospf network point-to-multipoint
Brian,
In a CCIE lab e>http://www.InternetworkExpert.com
-----Original Message-----
From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
Sent: Friday, November 28, 2003 3:22 PM
To: 'ccielab@groupstudy.com'
Cc: 'Brian Dennis'
Subject: RE: ospf network point-to-multipoint
Brian,
What are the possible reachability issues here.
Can you give an example. how without the /32 it would not function
correctly. I always,when shown an example understand much clearer, as I
assume most people do.
Kind regards.
Paul.
> -----Original Message-----
> From: Brian Dennis [SMTP:bdennis@internetworkexpert.com]
> Sent: Friday, November 28, 2003 10:38 PM
> To: navaid@rogers.com; ccielab@groupstudy.com
>R>> routers> only see the summarized route.
>
> Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
> bdennis@internetworkexpert.com
> Toll Free: 877-224-8987
> Direct: 775-745-6404 (Outside the US and Cana**********
** ***********
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:19 GMT-3