From: Pun, Alec CL (Alec.CL.Pun@pccw.com)
Date: Thu Nov 27 2003 - 22:42:54 GMT-3
Brian,
Thanks a lot. I think this command has already obsoleted, maybe I just
referred to old Cisco document.
regards,
alec
-----Original Message-----
From: Brian Dennis [mailto:bdennis@internetworkexpert.com]
Sent: Friday, November 28, 2003 3:23 AM
To: Pun, Alec CL; ccielab@groupstudy.com
Subject: RE: neighbor filter-list weight command
The weight option was removed from the command in IOS 12.1.
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Pun,
Alec CL
Sent: Thursday, November 27, 2003 8:14 AM
To: ccielab@groupstudy.com
Subject: neighbor filter-list weight command
Any tried the following command ?
router bgp 1
neighbor 1.1.1.1 filter-list 5 weight 300 <------
ip as-path access-list 5 permit ^100$
It is not available in my Cisco 2600 running IOS 12.2
regards,
alec
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:18 GMT-3