From: Jonathan V Hays (jhays@jtan.com)
Date: Thu Nov 27 2003 - 14:15:00 GMT-3
Again, I'm sorry if I was a bit too harsh. I would just prefer that
posters be much more specific and detailed about what they are asking.
Your original post could have been easily interpreted as if you didn't
know anything about the command at it. Which was how I interpreted it.
Sorry,
Jonathan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
William Chen
Sent: Thursday, November 27, 2003 12:04 PM
To: Jonathan V Hays; ccielab@groupstudy.com
Subject: Re: default-information - EIGRP command
Jonathan,
I DO read the DocCD and try to would out a scenario as the command
states.
However, I do not find the command works as the DocCD states. I
don't
know if I miss something and I try to seek for help here if anyone do
understand the commands said or anyone use this command before.
Moreover, the command is not "default-information originate" as the
OSPF/RIP/BGP. It is an IGRP/EIGRP command which is "default-information
[in|out] <access-list-number|access-list-name>"..
- William Chen
----- Original Message -----
From: "Jonathan V Hays" <jhays@jtan.com>
To: "'William Chen'" <kwchen@netvigator.com>; <ccielab@groupstudy.com>
Sent: Friday, November 28, 2003 12:48 AM
Subject: RE: default-information - EIGRP command
> William,
>
> Please read be sure to check the Doc CD before making a request for
> information. A question about some undocumented aspect of a command or
> some unusual use or error message is a good use of this mailing list.
> Asking very simple questions with obvious answers about commands
easily
> found on the Doc CD is not.
>
> If you don't know where the Configuration Guides and Command
References
> are on the Doc CD
>
> 1. Go to the following URL: www.cisco.com
>
> 2. Under "Useful Links" on the right side of the web page, click
> "Technical Documentation"
>
> 3. From the "Cisco IOS" drop down list select "Release 12.2"
>
> 4. Next, click "Cisco IOS Release 12.2 Configuration Guides and
Command
> References"
>
> 5. EIGRP information can be found under these two links:
>
> IPC: Cisco IOS IP Configuration Guide, Release 12.2
>
> IP2R: Cisco IOS IP Command Reference, Volume 2 of 3: Routing
Protocols,
> Release 12.2
>
> HTH,
>
> Jonathan
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> William Chen
> Sent: Thursday, November 27, 2003 11:15 AM
> To: ccielab@groupstudy.com
> Subject: default-information - EIGRP command
>
>
> Dear all,
>
> Can anyone tell me what is the use of the "default-information [in
|
> out]"
> command of EIGRP.
>
> --- William Chen
>
>
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:18 GMT-3