From: Jonathan V Hays (jhays@jtan.com)
Date: Thu Nov 27 2003 - 13:48:41 GMT-3
William,
Please read be sure to check the Doc CD before making a request for
information. A question about some undocumented aspect of a command or
some unusual use or error message is a good use of this mailing list.
Asking very simple questions with obvious answers about commands easily
found on the Doc CD is not.
If you don't know where the Configuration Guides and Command References
are on the Doc CD
1. Go to the following URL: www.cisco.com
2. Under "Useful Links" on the right side of the web page, click
"Technical Documentation"
3. From the "Cisco IOS" drop down list select "Release 12.2"
4. Next, click "Cisco IOS Release 12.2 Configuration Guides and Command
References"
5. EIGRP information can be found under these two links:
IPC: Cisco IOS IP Configuration Guide, Release 12.2
IP2R: Cisco IOS IP Command Reference, Volume 2 of 3: Routing Protocols,
Release 12.2
HTH,
Jonathan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
William Chen
Sent: Thursday, November 27, 2003 11:15 AM
To: ccielab@groupstudy.com
Subject: default-information - EIGRP command
Dear all,
Can anyone tell me what is the use of the "default-information [in |
out]"
command of EIGRP.
--- William Chen
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:18 GMT-3