From: Scott Morris (swm@emanon.com)
Date: Thu Nov 27 2003 - 11:42:44 GMT-3
You either change your config-reg (0x2101) for the boot method, or you
can boot system tftp so that the flash is not being locked.
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tom Young
Sent: Thursday, November 27, 2003 12:53 AM
To: ccielab@groupstudy.com
Subject: change the READ-ONLY flash setting
Hi, group
My router is too old, the flash is read-only, so I
couldn't change the ios from tftp, what the command could change the
status to read-write ?
thanks alot
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:18 GMT-3