Re: change the READ-ONLY flash setting

From: christopher snow (cbsnow31@yahoo.com)
Date: Thu Nov 27 2003 - 08:38:11 GMT-3

• Next message: Janó van Deventer: "Re: Frame-relay traffic shaping"
• Previous message: Stephen Skinner: "RE: UK BOOT-CAMPS"
• Maybe in reply to: Tom Young: "change the READ-ONLY flash setting"
• Next in thread: Scott Morris: "RE: change the READ-ONLY flash setting"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Change the config register to 0x2101 (boot mode).
Reload the router and you will now see the the flash
as read/write. Load your IOS image, change the config
reg back to 0x2102 and enjoy.

HTH,

Chris Snow
--- Tom Young <gitsyoung@yahoo.co.jp> wrote:
> Hi, group
>
> My router is too old, the flash is read-only, so
> I
> couldn't change the ios from tftp, what the command
> could
> change the status to read-write ?
>
> thanks alot
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! BB is Broadband by Yahoo!
> http://bb.yahoo.co.jp/
>
>

• Next message: Janó van Deventer: "Re: Frame-relay traffic shaping"
• Previous message: Stephen Skinner: "RE: UK BOOT-CAMPS"
• Maybe in reply to: Tom Young: "change the READ-ONLY flash setting"
• Next in thread: Scott Morris: "RE: change the READ-ONLY flash setting"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:18 GMT-3