From: Jason Viera (jasonviera@avenuecable.com)
Date: Wed Nov 26 2003 - 04:14:56 GMT-3
William, I also noticed the following in the command reference:
"Note If POTS and voice-network peers are mixed in the same hunt group,
the POTS dial peers must have priority over the voice-network dial peers. "
You might check out the command reference. You might see weird things happen
if the above isn't true, who knows???
HTH Jason
----- Original Message -----
From: "Jason Viera" <jasonviera@avenuecable.com>
To: "William Chen" <kwchen@netvigator.com>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, November 25, 2003 11:03 PM
Subject: Re: Dial Peer Hunt Group
> Under Dial-peer 30 you have used the "huntstop" command. I would assume
> based upon what you're seeing that because the call isn't actually
answered
> with the csim-start command that the "huntstop" command is doing what it's
> supposed to "stopping" the "hunting" feature. I could be way off, but
wonder
> what will happen if you remove the huntstop command, or if phones were
> actually used and the calls answered?? Let us know.
> Thanks
> Jason
>
>
> ----- Original Message -----
> From: "William Chen" <kwchen@netvigator.com>
> To: "Jason Viera" <jasonviera@avenuecable.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Tuesday, November 25, 2003 10:47 PM
> Subject: Dial Peer Hunt Group
>
>
> Dear Group,
>
> Here is the setting, and testing output, I found that the dial-peer
voice
> 20 is always called, even it is configured with the highest preference
> value:
>
> R4#sh run
> Building configuration...
>
> Current configuration : 1249 bytes
> !
> version 12.2
> service timestamps debug datetime msec
> service timestamps log datetime msec
> no service password-encryption
> !
> hostname R4
> !
> logging queue-limit 100
> !
> ip subnet-zero
> !
> !
> !
> ip audit notify log
> ip audit po max-events 100
> mpls ldp logging neighbor-changes
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> !
> no voice hpi capture buffer
> no voice hpi capture destination
> !
> !
> mta receive maximum-recipients 0
> !
> !
> !
> !
> interface FastEthernet0/0
> ip address 192.168.1.4 255.255.255.0
> duplex auto
> speed auto
> !
> interface Serial0/0
> no ip address
> shutdown
> no fair-queue
> !
> interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
> !
> interface Serial0/1
> no ip address
> shutdown
> !
> ip http server
> no ip http secure-server
> ip classless
> !
> !
> !
> !
> !
> call rsvp-sync
> !
> voice-port 1/0/0
> !
> voice-port 1/0/1
> !
> !
> mgcp profile default
> !
> !
> !
> dial-peer cor custom
> !
> !
> !
> dial-peer voice 10 pots
> destination-pattern 4444
> port 1/0/0
> !
> dial-peer voice 20 voip
> preference 5
> destination-pattern 7777
> session target ipv4:192.168.1.7
> !
> dial-peer voice 30 voip
> huntstop
> preference 4
> destination-pattern 7777
> session target ipv4:192.168.1.10
> !
> dial-peer voice 40 pots
> preference 8
> destination-pattern 7777
> port 1/0/1
> !
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> !
> !
> end
>
> R4#debug dialpeer
> dialpeer detailed info debugging is on
> R4#csim start 7777
> csim: called number = 7777, loop count = 1 ping count = 0
>
> *Mar 1 00:16:33.123: Inside dpMatchCore:
> *Mar 1 00:16:33.123: destination pattn: 7777 expanded string: 7777
> *Mar 1 00:16:33.123: MatchNextPeer: Peer 20 matched
> *Mar 1 00:16:33.123: MatchNextPeer: Peer 30 matched
> *Mar 1 00:16:33.123: MatchNextPeer: Peer 40 matched
>
> R7#sh voice port | in Oper
> Operation State is UP
> Operation State is DORMANT
>
> -- William
>
> >
> > 1H%s*L: "Jason Viera" <jasonviera@avenuecable.com>
> > $i4A: 2003/11/26 ,P4A$T $U$H 02:10:47 GMT+08:00
> > &,%s*L: "William Chen" <kwchen@netvigator.com>
> > %D&.: Re:
> >
> > How did you set the preference??? Please share your configuration.
> Whichever
> > peer has a preference of zero, which is the default, will be the first
> peer
> > preferred.
> > Thanks Jason
> >
> > ----- Original Message -----
> > From: "William Chen" <kwchen@netvigator.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Tuesday, November 25, 2003 8:11 PM
> >
> >
> > > Dear Group,
> > >
> > > I can't make the dial-peer hunt group works with the testing with
> "csim
> > start" command. I've configure several dial-peer with same
> > destination-pattern" When I simulate the dialing by "csim start"
command,
> > the order of selecting dial-peer is according the order of the
> configuration
> > file but not the preference I explicity set. Any idea?
> > >
> > > Best Regards,
> > > William Chen
> > >
> > >
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:17 GMT-3