From: William Chen (kwchen@netvigator.com)
Date: Wed Nov 26 2003 - 03:47:05 GMT-3
Dear Group,
Here is the setting, and testing output, I found that the dial-peer voice 20 is always called, even it is configured with the highest preference value:
R4#sh run
Building configuration...
Current configuration : 1249 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R4
!
logging queue-limit 100
!
ip subnet-zero
!
!
!
ip audit notify log
ip audit po max-events 100
mpls ldp logging neighbor-changes
!
!
!
!
!
!
!
!
!
!
!
!
no voice hpi capture buffer
no voice hpi capture destination
!
!
mta receive maximum-recipients 0
!
!
!
!
interface FastEthernet0/0
ip address 192.168.1.4 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0
no ip address
shutdown
no fair-queue
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface Serial0/1
no ip address
shutdown
!
ip http server
no ip http secure-server
ip classless
!
!
!
!
!
call rsvp-sync
!
voice-port 1/0/0
!
voice-port 1/0/1
!
!
mgcp profile default
!
!
!
dial-peer cor custom
!
!
!
dial-peer voice 10 pots
destination-pattern 4444
port 1/0/0
!
dial-peer voice 20 voip
preference 5
destination-pattern 7777
session target ipv4:192.168.1.7
!
dial-peer voice 30 voip
huntstop
preference 4
destination-pattern 7777
session target ipv4:192.168.1.10
!
dial-peer voice 40 pots
preference 8
destination-pattern 7777
port 1/0/1
!
!
!
line con 0
line aux 0
line vty 0 4
!
!
end
R4#debug dialpeer
dialpeer detailed info debugging is on
R4#csim start 7777
csim: called number = 7777, loop count = 1 ping count = 0
*Mar 1 00:16:33.123: Inside dpMatchCore:
*Mar 1 00:16:33.123: destination pattn: 7777 expanded string: 7777
*Mar 1 00:16:33.123: MatchNextPeer: Peer 20 matched
*Mar 1 00:16:33.123: MatchNextPeer: Peer 30 matched
*Mar 1 00:16:33.123: MatchNextPeer: Peer 40 matched
R7#sh voice port | in Oper
Operation State is UP
Operation State is DORMANT
-- William
>
> 1H%s*L: "Jason Viera" <jasonviera@avenuecable.com>
> $i4A: 2003/11/26 ,P4A$T $U$H 02:10:47 GMT+08:00
> &,%s*L: "William Chen" <kwchen@netvigator.com>
> %D&.: Re:
>
> How did you set the preference??? Please share your configuration. Whichever
> peer has a preference of zero, which is the default, will be the first peer
> preferred.
> Thanks Jason
>
> ----- Original Message -----
> From: "William Chen" <kwchen@netvigator.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, November 25, 2003 8:11 PM
>
>
> > Dear Group,
> >
> > I can't make the dial-peer hunt group works with the testing with "csim
> start" command. I've configure several dial-peer with same
> destination-pattern" When I simulate the dialing by "csim start" command,
> the order of selecting dial-peer is according the order of the configuration
> file but not the preference I explicity set. Any idea?
> >
> > Best Regards,
> > William Chen
> >
> > _______________________________________________________________________
> > Please help support GroupStudy by purchasing your study materials from:
> > http://shop.groupstudy.com
> >
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:17 GMT-3