From: Shafi, Shahid (sshafi@qualcomm.com)
Date: Sun Nov 23 2003 - 22:13:40 GMT-3
I am not sure about your first question as it is topology specific but
as far as 2nd question is concerned, if redistribution is done at
multiple points, u need to do something to avoid routing loops and
suboptimal routing. My favourite is distance command but other methods
can be employed. The lab scenario u r doing seems to have wrong
solution.
My 2 cents
Shahid
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Yasser Aly
Sent: Sunday, November 23, 2003 5:06 PM
To: ccielab@groupstudy.com
Subject: Multiple mutual redistribution points
All,
If you have a scenario where you are asked to provide full
reachability.
Three of the routers are running both OSPF & EIGRP. The scenario said
nothing about where to do redistribution.
The question is: Is it enough to do mutual redistribution on only one of
the
routers or should be done on the three of them ? ( The scenario solution
did
mutual redistribution on the three routers )
Even if I have to do mutual redistribution on more than one router,
what
would prevent routing loops or sub-optimal path selection from happening
? (
No precautions/filtering was done in the scenario solution )
Regards,
Yasser
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:16 GMT-3