From: Scott Morris (swm@emanon.com)
Date: Sat Nov 22 2003 - 00:21:17 GMT-3
You can't do it on a frame map... I had meant to say instead of the
frame map... Because when you are doing PPP over frame relay, the PPP
Virtual Template interface will actually have all of your appropriate
mapping criteria that a frame-map would otherwise have. So you aren't
really needing to bind a L3 address to the L2 DLCI within the
frame-relay config, but instead within the virtual template config.
Sorry for the confusion...
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: Silvio Nunes [mailto:silvio_98@hotmail.com]
Sent: Friday, November 21, 2003 5:45 PM
To: swm@emanon.com
Cc: ccielab@groupstudy.com
Subject: RE: RSVP
Hi Scott,
I didnt found an option to work with PPPoFR with frame map, only with
dlci
command:
R1(config-subif)#frame-relay interface-dlci 120 ?
ppp Use RFC1973 Encapsulation to support PPP over FR
R1(config-subif)#fram map ip 172.16.123.2 120 ?
broadcast Broadcasts should be forwarded to this address
cisco Use CISCO Encapsulation
compress Enable TCP/IP and RTP/IP header compression
ietf Use RFC1490/RFC2427 Encapsulation
nocompress Do not compress TCP/IP headers
payload-compression Use payload compression
rtp RTP header compression parameters
tcp TCP header compression parameters
Any suggestion ?
Regards,
>From: "Scott Morris" <swm@emanon.com>
>Reply-To: <swm@emanon.com>
>To: "'Silvio Nunes'" <silvio_98@hotmail.com>
>Subject: RE: RSVP
>Date: Thu, 20 Nov 2003 16:38:44 -0500
>
>I'm not sure if you saw my post on the subject or not (strange delays
>on things), but you could consider running PPPoFR on each of the
>DLCI's. That can be tied via the frame map, or interface dlci command.
>And once tied, it uses the virtual template interface. And you could
>have two separate RSVP setups that way.
>
>HTH,
>
>
>Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
>CISSP, JNCIS, et al. IPExpert CCIE Program Manager
>IPExpert Sr. Technical Instructor
>swm@emanon.com/smorris@ipexpert.net
>http://www.ipexpert.net
>
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Silvio Nunes
>Sent: Thursday, November 20, 2003 2:13 PM
>To: asadovnikov@comcast.net; ccielab@groupstudy.com
>Subject: RE: RSVP
>
>
>Thanks all
>
>Bye
>
>
> >From: "asadovnikov" <asadovnikov@comcast.net>
> >To: "'Silvio Nunes'" <silvio_98@hotmail.com>,<ccielab@groupstudy.com>
> >Subject: RE: RSVP
> >Date: Wed, 19 Nov 2003 23:04:20 -0500
> >
> >Can not be done. RSVP is not configurable perVC. Only way to do it
> >is
>
> >to move from multipoint interface with 2 VCs to two point-to-point
> >interfaces, and then configure RSVP on per-subinterface basis.
> >
> >Best regards,
> >Alexei
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> >Of
>
> >Silvio Nunes
> >Sent: Wednesday, November 19, 2003 7:53 PM
> >To: ccielab@groupstudy.com
> >Subject: RSVP
> >
> >
> >Guys,
> >
> >I need a help about how to configure RSVP for differents DLCIs, for
> >example:
> >
> >Interface Seria0/0
> >ip add 10.10.10.1 255.255.255.0
> >no frame-relay inverse-arp
> >no arp frame-relay
> >frame-relay map ip 10.10.10.2 110 broadcast
> >frame-relay map ip 10.10.10.3 111 broadcast
> >
> >I want to specify a different RSVP configuration for each DLCI, but I
> >didnt find an option into map-class frame-relay..
> >
> >Any suggestion ?
> >Regards,
> >
> >_________________________________________________________________
> >MSN Hotmail, o maior webmail do Brasil. http://www.hotmail.com
> >
> >_____________________________________________________________________
> >__
> >Please help support GroupStudy by purchasing your study materials
from:
>
> >http://shop.groupstudy.com
> >
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
> >
> >
>
>_________________________________________________________________
>MSN Hotmail, o maior webmail do Brasil. http://www.hotmail.com
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:15 GMT-3