From: Silvio Nunes (silvio_98@hotmail.com)
Date: Sat Nov 22 2003 - 07:16:19 GMT-3
Thanks for your help Scott.
Regards,
>From: "Scott Morris" <swm@emanon.com>
>Reply-To: <swm@emanon.com>
>To: "'Silvio Nunes'" <silvio_98@hotmail.com>
>CC: <ccielab@groupstudy.com>
>Subject: RE: RSVP
>Date: Fri, 21 Nov 2003 22:21:17 -0500
>
>You can't do it on a frame map... I had meant to say instead of the
>frame map... Because when you are doing PPP over frame relay, the PPP
>Virtual Template interface will actually have all of your appropriate
>mapping criteria that a frame-map would otherwise have. So you aren't
>really needing to bind a L3 address to the L2 DLCI within the
>frame-relay config, but instead within the virtual template config.
>
>Sorry for the confusion...
>
>
>Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
>CISSP, JNCIS, et al.
>IPExpert CCIE Program Manager
>IPExpert Sr. Technical Instructor
>swm@emanon.com/smorris@ipexpert.net
>http://www.ipexpert.net
>
>
>-----Original Message-----
>From: Silvio Nunes [mailto:silvio_98@hotmail.com]
>Sent: Friday, November 21, 2003 5:45 PM
>To: swm@emanon.com
>Cc: ccielab@groupstudy.com
>Subject: RE: RSVP
>
>
>Hi Scott,
>
>I didnt found an option to work with PPPoFR with frame map, only with
>dlci
>command:
>
>R1(config-subif)#frame-relay interface-dlci 120 ?
>ppp Use RFC1973 Encapsulation to support PPP over FR
>
>R1(config-subif)#fram map ip 172.16.123.2 120 ?
>broadcast Broadcasts should be forwarded to this address
>cisco Use CISCO Encapsulation
>compress Enable TCP/IP and RTP/IP header compression
>ietf Use RFC1490/RFC2427 Encapsulation
>nocompress Do not compress TCP/IP headers
>payload-compression Use payload compression
>rtp RTP header compression parameters
>tcp TCP header compression parameters
>
>Any suggestion ?
>
>Regards,
>
>
>
>
> >From: "Scott Morris" <swm@emanon.com>
> >Reply-To: <swm@emanon.com>
> >To: "'Silvio Nunes'" <silvio_98@hotmail.com>
> >Subject: RE: RSVP
> >Date: Thu, 20 Nov 2003 16:38:44 -0500
> >
> >I'm not sure if you saw my post on the subject or not (strange delays
> >on things), but you could consider running PPPoFR on each of the
> >DLCI's. That can be tied via the frame map, or interface dlci command.
>
> >And once tied, it uses the virtual template interface. And you could
> >have two separate RSVP setups that way.
> >
> >HTH,
> >
> >
> >Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> >CISSP, JNCIS, et al. IPExpert CCIE Program Manager
> >IPExpert Sr. Technical Instructor
> >swm@emanon.com/smorris@ipexpert.net
> >http://www.ipexpert.net
> >
> >
> >-----Original Message-----
> >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>
> >Silvio Nunes
> >Sent: Thursday, November 20, 2003 2:13 PM
> >To: asadovnikov@comcast.net; ccielab@groupstudy.com
> >Subject: RE: RSVP
> >
> >
> >Thanks all
> >
> >Bye
> >
> >
> > >From: "asadovnikov" <asadovnikov@comcast.net>
> > >To: "'Silvio Nunes'" <silvio_98@hotmail.com>,<ccielab@groupstudy.com>
> > >Subject: RE: RSVP
> > >Date: Wed, 19 Nov 2003 23:04:20 -0500
> > >
> > >Can not be done. RSVP is not configurable perVC. Only way to do it
> > >is
> >
> > >to move from multipoint interface with 2 VCs to two point-to-point
> > >interfaces, and then configure RSVP on per-subinterface basis.
> > >
> > >Best regards,
> > >Alexei
> > >
> > >-----Original Message-----
> > >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > >Of
> >
> > >Silvio Nunes
> > >Sent: Wednesday, November 19, 2003 7:53 PM
> > >To: ccielab@groupstudy.com
> > >Subject: RSVP
> > >
> > >
> > >Guys,
> > >
> > >I need a help about how to configure RSVP for differents DLCIs, for
> > >example:
> > >
> > >Interface Seria0/0
> > >ip add 10.10.10.1 255.255.255.0
> > >no frame-relay inverse-arp
> > >no arp frame-relay
> > >frame-relay map ip 10.10.10.2 110 broadcast
> > >frame-relay map ip 10.10.10.3 111 broadcast
> > >
> > >I want to specify a different RSVP configuration for each DLCI, but I
>
> > >didnt find an option into map-class frame-relay..
> > >
> > >Any suggestion ?
> > >Regards,
> > >
> > >_________________________________________________________________
> > >MSN Hotmail, o maior webmail do Brasil. http://www.hotmail.com
> > >
> > >_____________________________________________________________________
> > >__
> > >Please help support GroupStudy by purchasing your study materials
>from:
> >
> > >http://shop.groupstudy.com
> > >
> > >Subscription information may be found at:
> > >http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> >
> >_________________________________________________________________
> >MSN Hotmail, o maior webmail do Brasil. http://www.hotmail.com
> >
> >_______________________________________________________________________
> >Please help support GroupStudy by purchasing your study materials from:
>
> >http://shop.groupstudy.com
> >
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
> >
>
>_________________________________________________________________
>MSN Hotmail, o maior webmail do Brasil. http://www.hotmail.com
>
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:15 GMT-3