From: Phil (ciscostudent1@yahoo.com.br)
Date: Wed Nov 19 2003 - 23:36:31 GMT-3
The inside interface on the PIX501 running 6.3.3 is already set to 100gull and that cannot be changed. My PC and laptop are set to auto though (will hardset and reply to the group).
Thanks!
Paul Patrick <ppatrick@cisco.com> wrote:
Good point. May want to lock the PIX 501 to 100 full on E1 to force the
workstations to use 100 full.
P.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jim Gillen
Sent: Wednesday, November 19, 2003 3:26 PM
To: Phil; security@groupstudy.com; ccielab@groupstudy.com
Subject: Re: Who has a PIX501 to the internet?
Phil
Check the duplex setting on the workstations. This can cause some very
slow
file transfers under windows and UNIX if there is a mismatch.
May not apply here though.
----- Original Message -----
From: "Phil"
To: ;
Sent: Thursday, November 20, 2003 8:52 AM
Subject: OT: Who has a PIX501 to the internet?
> I have a PIX501 running 6.3.3 connected to the internet and a PC and a
laptop connected to the internal switch in the pix. The PC has a shared
folder I use to backup my laptop. It is super slow when copying files
from
the laptop to the PC. FTP works fine. I tried tweaking the "sysopt"
command
parameters with no success.
>
> Transfer works fine when connected to a regular switch. Has anyone
seen
this before?
>
> Thanks in advance,
>
> Phil
>
>
>
> ---------------------------------
> Yahoo! Mail - 6MB, anti-spam e antivmrus gratuito. Crie sua conta
agora!
---------------------------------
Yahoo! Mail - 6MB, anti-spam e antivmrus gratuito. Crie sua conta agora!
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:14 GMT-3