From: Ken.Farrington@barclayscapital.com
Date: Tue Nov 18 2003 - 18:46:44 GMT-3
Guys, just pulled this from the CD......for a Cisco 800
Question is,
How do you determine if an FXS uses alaw or ulaw on a 2600 router? Can you
set it, how do you display it?
The only thing I can find uner the voice-port 1/0/0 command is cptone?
Many thx indeed,
Ken
alaw and ulaw
Specifies the pulse code modulation (PCM) encoding scheme for telephones,
fax machines, or modems connected to a Cisco 800 series router. The keywords
are as follows:
alaw-Specifies the ITU-T PCM encoding scheme used to represent analog voice
samples as digital values.
ulaw-Specifies the North American PCM encoding scheme used to represent
analog voice samples as digital values.
The default depends on the country chosen in the pots country command (on a
cisco 800)
------------------------------------------------------------------------
For more information about Barclays Capital, please
visit our web site at http://www.barcap.com.
Internet communications are not secure and therefore the Barclays
Group does not accept legal responsibility for the contents of this
message. Although the Barclays Group operates anti-virus programmes,
it does not accept responsibility for any damage whatsoever that is
caused by viruses being passed. Any views or opinions presented are
solely those of the author and do not necessarily represent those of the
Barclays Group. Replies to this email may be monitored by the Barclays
Group for operational or business reasons.
------------------------------------------------------------------------
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:13 GMT-3