Re: 3700 series router - ethernet switch module.

From: nettable_walker@comcast.net
Date: Tue Nov 18 2003 - 13:03:36 GMT-3


That's a beautiful thing !

I'll upgrade to 12.3.4T

Richard
CCIE# 12388

//
> After sending this post I read the URL and I was not able to do a "no
> switchport". I was running 12.2.15T7. I upgrade to 12.3.4T and sure
> enough it works!
>
> C3745(config)#inter fa 2/3
> C3745(config-if)#no switchport
> C3745(config-if)#ip address 1.1.1.1 255.255.255.0
> C3745(config-if)#^Z
>
> Dave
>
> MADMAN wrote:
>
> > You can configure a layer three interface, indirectly:
> >
> > C3745(config-if)#inter fa 2/0
> > C3745(config-if)#switchport access vlan 100
> > C3745(config-if)#inter vlan 100
> > C3745(config-if)#ip add 100.1.1.1 255.0.0.0
> >
> > Dave
> >
> > Paul Chen wrote:
> >
> >> Hi All,
> >>
> >> I found an CCO article that says you can configure Layer 3 interfaces
> >> on the
> >> 16 port ethernet switch module for the 3700 series router. It is on the
> >> section configuring layer 3 interfaces.
> >>
> >> Having tested it out, I found out that it can't be done.
> >>
> >> Can anyone verify that ?
> >>
> >>
> >> http://www.cisco.com/en/US/products/sw/iosswrel/ps5012/products_feature_guid
> >>

> >> e09186a008018165b.html
> >>
> >>
> >>
> >> Router(config-if)#no switchport ?
> >> access Set access mode characteristics of the interface
> >> mode Set trunking mode of the interface
> >> priority Set 802.1p priorities
> >> trunk Set trunking characteristics of the interface
> >> voice Voice appliance attributes
> >>
> >> Router(config-if)#no switchport
> >> % Incomplete command.
> >>
> >> Router(config-if)#no switchport ac
> >> Router(config-if)#no switchport access
> >> % Incomplete command.
> >>
> >> Router(config-if)#no switchport access ?
> >> vlan Set VLAN when interface is in access mode
> >>
> >> Router(config-if)#no switchport access vl
> >> Router(config-if)#no switchport access vlan
> >> Router(config-if)#ip add 10.1.1.2 255.0.0.0
> >>
> >> % IP addresses may not be configured on L2 links.
> >>
> >> Router(config-if)#
> >>
> >> Thanks,
> >> Paul
> >>
> >> _______________________________________________________________________

> >> Please help support GroupStudy by purchasing your study materials from:
> >> http://shop.groupstudy.com
> >>
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
> >>
> >
>
> --
> David Madland
> CCIE# 2016
> Sr. Network Engineer
> Qwest Communications
> 612-664-3367
>
> "Emotion should reflect reason not guide it"
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:13 GMT-3