max-reserved-bandwidth

From: Cristian Henry H (chenry@reuna.cl)
Date: Mon Nov 17 2003 - 12:39:02 GMT-3

• Next message: kasturi cisco: "Re: PIM Dense-mode over Frame Relay"
• Previous message: Howard C. Berkowitz: "RE: Asymmetric Routing"
• Next in thread: Ozgur Guler (Garanti Teknoloji): "RE: max-reserved-bandwidth"
• Maybe reply: Ozgur Guler (Garanti Teknoloji): "RE: max-reserved-bandwidth"
• Maybe reply: Hung, Sing-Yu: "RE: max-reserved-bandwidth"
• Maybe reply: Donny MATEO: "RE: max-reserved-bandwidth"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello group,

If we have the following configuration:

class-map match-all ftp
 match protocol ftp
class-map match-all telnet
 match protocol telnet
!
policy-map qos
 class ftp
  bandwidth 100
 class telnet
  bandwidth 50
 class class-default
  bandwidth 50
!
int s0/0
 bandwith 250
 ip rtp priority 16384 16383 50
 service-policy output qos
!

What should be the correct value of max-reserved-bandwidth parameter to
config over the serial 0/0 interface?, 80%?

Thank's in advance.

-- 
Cristian E. Henry
REUNA
E-mail: chenry@reuna.cl
Fono: 56-2-3370336

• Next message: kasturi cisco: "Re: PIM Dense-mode over Frame Relay"
• Previous message: Howard C. Berkowitz: "RE: Asymmetric Routing"
• Next in thread: Ozgur Guler (Garanti Teknoloji): "RE: max-reserved-bandwidth"
• Maybe reply: Ozgur Guler (Garanti Teknoloji): "RE: max-reserved-bandwidth"
• Maybe reply: Hung, Sing-Yu: "RE: max-reserved-bandwidth"
• Maybe reply: Donny MATEO: "RE: max-reserved-bandwidth"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:13 GMT-3