From: Scott Morris (swm@emanon.com)
Date: Sun Nov 16 2003 - 15:20:14 GMT-3
I believe net3 doesn't use SPIDs. Remember that SPIDs are a North
America thing only. The 5ESS switch can be configured to use SPIDs, but
it may not be. Depends on the switch tech.
As for the ATM portion, I would say that the answer will depend greatly
on the wording of the exam. You can do PPPoA with the IETF way
(aal5mux) or the Cisco way (aal5ciscoppp). I would know how to do both
just in case the exam says something one way or the other.
For the ilmi-keepalive, you should really set this to whatever the
switch is set to. If you don't enable the ilmi pvc, then setting or
turning off the keepalive is irrelevant. Watch what the lab says and
play it from there.
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Adminl@kuix.com
Sent: Sunday, November 16, 2003 6:03 AM
To: ccielab@groupstudy.com
Subject: 2 question on (ISDN and ATM)
Dears..
I have 2 Questions...
Q1-For ISDN
isdn switch-type basic-net3..is it need to configure spids in isdn
interface..or not..? for example basic-5ess...It is not need spids on
isdn interface!!!
Q2-ATM
interface ATM1/0
no ip address
no atm ilmi-keepalive
pvc 0/102
broadcast
encapsulation aal5mux ppp Virtual-Template1
!
!
interface Virtual-Template1
ip address 192.4.2.1 255.255.255.0
A- Can I use here the encapsulation aal5mux ppp or aal5ciscoppp or just
PPP or can select any one?
B- no atm ilmi-keepalive..can i use it on the LAB Exam or i Have to
enable it?
PLz help
Thanx
Adminl
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:12 GMT-3