From: k c (jwongccie@yahoo.com.hk)
Date: Sun Nov 16 2003 - 11:57:02 GMT-3
Thanks Jonathan. It is unbelivable that using "cisco" password is not allowed in HSRP.
Jonathan V Hays <jhays@jtan.com> wrote:Strange but true, in the case of HSRP the "cisco" password is not
allowed. (I'm guessing because it has been used in too many examples and
training classes.) Try any other password and it will work (e.g.,
"ciscoA").
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On
>Behalf Of k c
>Sent: Sunday, November 16, 2003 2:59 AM
>To: ccielab@groupstudy.com
>Subject: HSRP Authentication
>
>
>Something strange! Problem in "standby 1 authen cisco", not
>show up after typing the command? Any idea!
>
>R6#sh run int f0/0
>interface FastEthernet0/0
> ip address 137.10.74.6 255.255.255.192
> duplex full
> standby 1 ip 137.10.74.1
> standby 1 timers 7 17
> standby 1 priority 110
> standby 1 preempt
> standby 1 name ipexpert_r6
> standby 1 mac-address 0000.0c07.aaaa
> standby 1 track Serial4/0 20
>end
>
>R6#conf t
>Enter configuration commands, one per line. End with CNTL/Z.
>R6(config)#int f0/0
>R6(config-if)#stand 1 authentication cisco
>R6#sh run int f0/0
>Current configuration : 274 bytes
>!
>interface FastEthernet0/0
> ip address 137.10.74.6 255.255.255.192
> duplex full
> standby 1 ip 137.10.74.1
> standby 1 timers 7 17
> standby 1 priority 110
> standby 1 preempt
> standby 1 name ipexpert_r6
> standby 1 mac-address 0000.0c07.aaaa
> standby 1 track Serial4/0 20
>end
>Version: (C7200-JK9O3S-M), Version 12.2(15)T8,
>
>Shining Friends!B&n$_&n3x!B73$k&p:q...
>.v:)9aAn 1!$_3sC4
>http://ringtone.yahoo.com.hk/
>
>_______________________________________________________________________
>Please help support GroupStudy by purchasing your study materials from:
>http://shop.groupstudy.com
>
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:12 GMT-3