From: seonghui (seonghui@vads.com)
Date: Sat Nov 15 2003 - 13:24:02 GMT-3
global command --> system MTU 1500
follow by a reload
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Silvio Nunes
Sent: Saturday, November 15, 2003 11:06 PM
To: ccielab@groupstudy.com
Subject: OSPF - MTU mismatch
Group,
When I try to establish an relationship between Interface Vlan1 (Cat 3550)
and Ethernet0 (R1) in OSPF, the relationship can not be form because the MTU
is different:
Interface Vlan1 - MTU Size 1504 bytes
Ethernet 0 - MTU Size 1500 butes
When I put the command IP OSPF IGNORE-MTU for each interface, everything
works fine.
Is there another way to do the same thing ?
Considering that there is not the command MTU xx for interface Vlan..
Regards,
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:12 GMT-3