From: MADMAN (dmadlan@qwest.com)
Date: Fri Nov 14 2003 - 15:59:49 GMT-3
No but the aux port would work.
Dave
Casey, Paul (6822) wrote:
> Hello,
>
> Can someone help me with this,
> Is it possible to connect 2 routers back to back using console ports alone.
>
> Also under the console port, I can type
>
> line con 0
> transport output telnet
>
> what is this for..?? or more specifically, what can I use this for.
> Is it possible to run routing protocols over the console port in lab
> environment.
> Is there anyway I could configure the console port to do IP routing using a
> virtual-template and apply
> - Sorry for the dumb question, but if I don't ask, I will never find out.
>
> Thanks in advance.
> Kind regards.
>
>
>
> ****************************************************************************************
>
> This E-mail is from O2. The E-mail and any files
> transmitted with it are confidential and may also be privileged and intended
> solely for the use of the individual or entity to whom they are addressed.
> Any unauthorised direct or indirect dissemination, distribution or copying
> of this message and any attachments is strictly prohibited. If you have
> received the E-mail in error please notify postmaster@O2.com or
> telephone ++ 353 1 6095000.
>
> *****************************************************************************************
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"Emotion should reflect reason not guide it"
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:11 GMT-3