From: Sharifi, Reza (Reza.Sharifi@GD-NS.Com)
Date: Fri Nov 14 2003 - 15:53:54 GMT-3
Take a look at this link.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ffun
_c/ffcprt1/fcf003.htm
-----Original Message-----
From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
Sent: Friday, November 14, 2003 1:39 PM
To: ccielab@groupstudy.com
Subject: -Console port question.
Hello,
Can someone help me with this,
Is it possible to connect 2 routers back to back using console ports alone.
Also under the console port, I can type
line con 0
transport output telnet
what is this for..?? or more specifically, what can I use this for.
Is it possible to run routing protocols over the console port in lab
environment.
Is there anyway I could configure the console port to do IP routing using a
virtual-template and apply
- Sorry for the dumb question, but if I don't ask, I will never find out.
Thanks in advance.
Kind regards.
****************************************************************************
************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
telephone ++ 353 1 6095000.
****************************************************************************
*************
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:12 GMT-3