From: Richard Davidson (rich@myhomemail.net)
Date: Thu Nov 13 2003 - 15:00:42 GMT-3
the attachment was removed. This is a link to the
diagram.
http://www.geocities.com/r1davidson/files/bridge.gif
--- Richard Davidson <rich@myhomemail.net> wrote:
> I am trying to configure a router to bridge between
> a
> serial interface and an ehternet interface. The
> Ethernet interface is connected to a device. This
> device bridges the traffic to another interface on
> the
> same router, which has an ip address on the same
> subnet as the remote Serial device.
>
> When the router pings the remote serial interface
> the
> encapsulation fails and the arp reply is invalid.
>
> Does anyone know of a way to configure this? I have
> tried static arp entries for the remote serial ip
> but
> have not been successful. Any comments?
> Thanks
> Rich
>
>
> =====
> Richard Davidson
> Yahoo IM: r1davidson
> e-mail rich@myhomemail.net
>
> [GroupStudy removed an attachment of type image/gif
> which had a name of New Visio 2000 Drawing (2).gif]
>
>
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:11 GMT-3
