From: Scott Morris (swm@emanon.com)
Date: Tue Nov 11 2003 - 14:22:29 GMT-3
1. Change network type
2. Redistribute connected
3. Area range command
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
CISSP, JNCIS, et al.
IPExpert CCIE Program Manager
IPExpert Sr. Technical Instructor
swm@emanon.com/smorris@ipexpert.net
http://www.ipexpert.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
JamesGEF
Sent: Tuesday, November 11, 2003 12:00 PM
To: ccielab@groupstudy.com
Subject: Distributing loopback into OSPF
In one of IPExpert 5.0 exercises, I had to distribute loopback IP
addresses into OSPF without the /32 mask...they had to be seen with
24-bit subnets. It states in the notes that there are 3 ways of doing
this. I could only think of two:
1. change the network type of the loopback interfaces so that it doesn't
default to /32 mask. 2. redistribute connected and summarize the
addresses with a /24 mask
I can't think of the third way.
any ideas?
Thanks!
James
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:10 GMT-3