From: Danny.Andaluz@triaton-na.com
Date: Thu Nov 06 2003 - 23:44:04 GMT-3
Hey, Group. Why won't EIGRP install a summary for 139.10.0.0 like it did 149.10.0.0????? This has me stumped. >:-|
Here's my logical topology:
http://home.comcast.net/~practice.lab.examples/eigrpautosummary.jpg <http://home.comcast.net/~practice.lab.examples/eigrpautosummary.jpg>
Thanks,
Danny
switch1# sh run | b router eigrp 100
router eigrp 100
network 139.10.12.0 0.0.0.255
network 149.10.11.0 0.0.0.255
auto-summary
no eigrp log-neighbor-changes
switch1#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
139.10.0.0/24 is subnetted, 3 subnets
C 139.10.10.0 is directly connected, Loopback0
C 139.10.12.0 is directly connected, FastEthernet0/23
C 139.10.45.0 is directly connected, Vlan45
149.10.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 149.10.11.0/24 is directly connected, Vlan11
D 149.10.0.0/16 is a summary, 00:02:03, Null0
switch1#
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:09 GMT-3
