Re: Voice vlan with native vlan

From: Cristian Henry H (chenry@reuna.cl)
Date: Wed Nov 05 2003 - 16:32:41 GMT-3

Both are corrects, in my opinion.

Adminl@kuix.com ha escrito:
>
> Dears..
>
> I know we talked too much about this issue..but still some people confused and dont know what is the last solution ..
>
> If we have IP Phone is attached to port Fa0/11on SW. This phone supports dot1q trunking. Configure fa0/11 to support voice on VLAN 100 with name VOICE, and ensure that data goes to VLAN 5.
>
> Q1-Which solution is right? A or B?and why?
>
> Q2-which case can I use A ?
> and which case can I use B?
>
> Solution (A)
>
> interface FastEthernet0/11
> switchport access vlan 5
> switchport voice vlan 100
> switchport trunk encapsulation dot1q
>
> OR
>
> Solution (B)
>
> interface FastEthernet0/11
> switchport trunk encapsulation dot1q
> switchport trunk native vlan 5
> switchport mode trunk
> switchport voice vlan 100
>
> Thanx..
>
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html 

-- 
Cristian E. Henry
REUNA

E-mail: chenry@reuna.cl
Fono: 56-2-3370336

This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:08 GMT-3