From: Martin D. Fierbaugh (marty@networkwv.com)
Date: Wed Nov 05 2003 - 16:31:41 GMT-3
You could also use:
10Meg3550.Wbo(config-if)#switchport broadcast ?
<0-100> Broadcast suppression level as a % of total bandwidth
**********************************
Martin D. Fierbaugh, CCNP
Manager IP Routing
NTELOS Advanced Data Engineering
(w) 304.353.8916
(m) 304.415.0427
**********************************
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tan Chai Heng
Sent: Wednesday, November 05, 2003 5:17 AM
To: ccielab@groupstudy.com
Subject: Limiting broadcast in Catalyst
Hi all,
I'm sure I read somewhere sometime ago that we can limit the broadcast
of
ethernet in a switch, say cat 3550. What do I need to do on the switch
to
limit the broadcast level to say, less than 20%? I've been trying to dig
on
the solution so much that I'm beginning to think that the question is
not
even valid...help!!!
Thanks
CH
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:08 GMT-3