From: Pun, Alec CL (Alec.CL.Pun@pccw.com)
Date: Tue Nov 04 2003 - 15:04:36 GMT-3
police normally means rate-limiting in the ingress direction whereas
bandwidth specifies the amount of BW reserved in the egress direction.
Starting from 12.2, the bandwidth percent refers to the percentage
calculated from the bandwidth of the port, say configured by the bandwidth
command or simply LINE RATE.
Please clarify me if I made any wrong assumptions.
regards,
alec
-----Original Message-----
From: Kleberg, Jason [mailto:JKleberg@glhec.org]
Sent: Wednesday, November 05, 2003 1:03 AM
To: 'ccielab@groupstudy.com'
Subject: CB policing with bandwidth command
I am looking over some sample configs and one of them is using class based
policing and the bandwidth command under the class. Here is the config:
policy-map CCIE
class color
bandwidth percent 15 <-------------
police 300000 1500 3000 conform-action ....................
int ser0/0
ip x.x.x...
service-policy out CCIE
clockrate 1544000
What exactly does the bandwidth command do when used in conjuction with the
police command? I thought maybe 15% of the int bw would be 300000, but 15%
of 1544000 is 231600.
thanks in advance.
jason
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:08 GMT-3