From: Kleberg, Jason (JKleberg@glhec.org)
Date: Tue Nov 04 2003 - 14:03:15 GMT-3
I am looking over some sample configs and one of them is using class based
policing and the bandwidth command under the class. Here is the config:
policy-map CCIE
class color
bandwidth percent 15 <-------------
police 300000 1500 3000 conform-action ....................
int ser0/0
ip x.x.x...
service-policy out CCIE
clockrate 1544000
What exactly does the bandwidth command do when used in conjuction with the
police command? I thought maybe 15% of the int bw would be 300000, but 15%
of 1544000 is 231600.
thanks in advance.
jason
This archive was generated by hypermail 2.1.4 : Fri Dec 12 2003 - 12:29:08 GMT-3