From: Yasser Aly (blackyeyes00@hotmail.com)
Date: Fri Oct 24 2003 - 16:28:42 GMT-3
Found below answers for some of your questions.
>From: Tan Chai Heng <tanch@kuala-lumpur.sns.slb.com>
>Reply-To: Tan Chai Heng <tanch@kuala-lumpur.sns.slb.com>
>To: ccielab@groupstudy.com
>Subject: Frame Relay questions
>Date: Thu, 23 Oct 2003 12:21:40 +0800
>
>Hello all,
>
>When we use FR:
>
>1. We do NOT have to specify DLCI is the connection is Point-to-Point
>subinterface or if it's physicaltophysical, correct?
You don't have to specify DLCI if it is physical to physical provided that
frame-relay inverse-arp is
not disabled( By default it is enabled) on Physical and multipoint.
On point-to-point you will need to specificy the dlci
>2. We do NOT have to specify FR-map and Local DLCI at the same physical
>interface, either one is sufficient, correct?
Correct
>3. We do NOT have to specify a map for local DLCI, for example, if I have a
>serial0 interface with DLCI 100, do I need a map statement for the DLCI to
>reference the serial interface?
You will need this if u like to ping your own serial IP.
If u have answers for the rest of your questions it would be nice to hear.
Regards,
Yasser
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:07 GMT-3