From: Danny.Andaluz@triaton-na.com
Date: Fri Oct 17 2003 - 10:58:50 GMT-3
Thanks for the help, Bob.
Danny
-----Original Message-----
From: rwo@mac.com [mailto:rwo@mac.com]
Sent: Thursday, October 16, 2003 8:55 PM
To: Andaluz, Danilo, Triaton/NA
Cc: ccielab@groupstudy.com
Subject: Re: copying startup-config to flash with a specified name
r9#copy startup-config slot0:router2
Destination filename [router2]?
7682 bytes copied in 0.612 secs (12552 bytes/sec)
or if you don't have a flash card:
r9#copy startup-config bootflash:router2
Destination filename [router2]?
7682 bytes copied in 0.248 secs (30976 bytes/sec)
Bob
On Thursday, October 16, 2003, at 08:04 PM,
Danny.Andaluz@triaton-na.com wrote:
> I'm doing a lab and the requirement says:
>
> Copy R2's startup-config to the flash naming it "router2".
>
> I cannot figure this out. Any ideas???
>
> Thanks,
> Danny
>
> ______________________________________________________________________
> _
> Please help support GroupStudy by purchasing your study materials from:
> http://shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:04 GMT-3