From: Nir Wittenberg (nwittenberg@msncomm.com)
Date: Thu Oct 16 2003 - 21:30:55 GMT-3
My policy-map gives a priority of 512. Under my subinterfaces I have
bandwidth statements of 768. So it is in the range. I also used the
max-reserved-bandwidth 100 command under the main interface with the same
result.
Nir
-----Original Message-----
From: Hale, Wendy [mailto:WRHale@NECBNS.com]
Sent: Thursday, October 16, 2003 6:27 PM
To: Nir Wittenberg
Subject: RE: QOS error message
Yes. IOS by default reserves 25% of the configured bandwidth for overhead
traffic. So if your bandwidth statement says 768k, you can only reserve
576K.
-----Original Message-----
From: Nir Wittenberg [ mailto:nwittenberg@msncomm.com]
Sent: Thursday, October 16, 2003 5:21 PM
To: ccielab@groupstudy.com
Subject: QOS error message
Anyone seen this error message before? I tried putting on a service
policy to a map-class and got this:
I/f Serial0/0.17 DLCI 17 class voice requested bandwidth 512 (kbps)
Available o
nly 384 (kbps)
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:03 GMT-3