From: Jeff Kesemeyer (groupstudy@bradshawlabs.com)
Date: Thu Oct 16 2003 - 21:21:08 GMT-3
copy startup-config flash:router2
You might be able to do the following as well:
copy startup-config router2
Do not confirm to erase flash or you will have problems.
You have to be on 2600/3600 router for this to work, you can not do this
on a 2500 router.
This is a great way to save a initial config as well.
Jeff Kesemeyer
CCNP, CCDP, MCSE, CNE
www.bradshawlabs.com
"Your CCIE Rack Rental Source"
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Danny.Andaluz@triaton-na.com
Sent: Thursday, October 16, 2003 8:04 PM
To: ccielab@groupstudy.com
Subject: copying startup-config to flash with a specified name
I'm doing a lab and the requirement says:
Copy R2's startup-config to the flash naming it "router2".
I cannot figure this out. Any ideas???
Thanks,
Danny
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:03 GMT-3