From: miken (miken@sisna.com)
Date: Tue Oct 14 2003 - 12:52:32 GMT-3
You will be given sufficient information to meet the requirements. If you
are not sure, you can ask the proctor.
HTH,
Mike N
----- Original Message -----
From: "ccie2be" <ccie2be@nyc.rr.com>
To: "Group Study" <ccielab@groupstudy.com>
Sent: Saturday, October 11, 2003 8:23 AM
Subject: Basic voice port question
> Hi all,
>
> When one or more voice ports need to be configured in the lab, we have to
> know for the 2600 the following info:
>
> Router(config)# voice-port slot/subunit/port
>
>
> Does Cisco tell us what "slot/subunit/port" to use or do we need to use a
show
> command to figure that out? What show command can be used to determine
the
> above info?
>
> Thanks, dt
>
> ***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
> _______________________________________________________________________
> Please help support GroupStudy by purchasing your study materials from:
> shop.groupstudy.com
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:01 GMT-3