From: Ram Shummoogum (rshummoo@ca.ibm.com)
Date: Sat Oct 11 2003 - 11:34:40 GMT-3
It only makes sense that they will provide you with such info.
I think you are getting too worried about unnecessary details.
"ccie2be" <ccie2be@nyc.rr.com>@groupstudy.com on 10/11/2003 10:23:45 AM
Please respond to "ccie2be" <ccie2be@nyc.rr.com>
Sent by: nobody@groupstudy.com
To: "Group Study" <ccielab@groupstudy.com>
cc:
Subject: Basic voice port question
Hi all,
When one or more voice ports need to be configured in the lab, we have to
know for the 2600 the following info:
Router(config)# voice-port slot/subunit/port
Does Cisco tell us what "slot/subunit/port" to use or do we need to use a
show
command to figure that out? What show command can be used to determine the
above info?
Thanks, dt
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:53:00 GMT-3