From: Jonathan V Hays (jhays@jtan.com)
Date: Wed Oct 08 2003 - 15:06:27 GMT-3
A point-to-point physical connection is certainly not necessary,
otherwise it would be impossible to configure a VPN across the Internet.
BTW, although there is nothing official on the Cisco web site, it is
very unlikely you will see IPSec on the R&S exam. If I were studying for
the R&S lab test I wouldn't waste much time on it.
Please post your configs for more detailed help.
Jonathan
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ken.Farrington@barclayscapital.com
Sent: Wednesday, October 08, 2003 1:39 PM
To: ccielab@groupstudy.com
Subject: IPSEC first timer
Me again,here,
Just configd IPsec for the frist time, not working, but I will figure
this
out hopeully.
Can I just confirm 1 point that your can run the following
---------rtr1-----------rtr2-----------rtr3-------------
and peer the ipsec tunnel between rtr1 and rtr3 - or is it just
point-to-point unless you use GRE
many thx
Ken (playing with ipsec and cbac into the night)
------------------------------------------------------------------------
For more information about Barclays Capital, please
visit our web site at http://www.barcap.com.
Internet communications are not secure and therefore the Barclays
Group does not accept legal responsibility for the contents of this
message. Although the Barclays Group operates anti-virus programmes,
it does not accept responsibility for any damage whatsoever that is
caused by viruses being passed. Any views or opinions presented are
solely those of the author and do not necessarily represent those of the
Barclays Group. Replies to this email may be monitored by the Barclays
Group for operational or business reasons.
------------------------------------------------------------------------
***Get your CCIE and a FREE vacation: Shop.GroupStudy.com***
This archive was generated by hypermail 2.1.4 : Mon Nov 24 2003 - 07:52:59 GMT-3